How to make halloumi and whey ricotta from scratch – A complete guide

Halloumi, the acclaimed Cypriot cheese. Halloumi is a salty semi hard cheese made from milk curds that require no added cultures to be produced. It is well known for its squeaky nature when eaten, however that is not always the case as it depends on its aging process and milk used. For example halloumi that has been stored in brine has a more mature and harder texture, hence there is no form of squeakiness. At the same time halloumi made with just goat’s milk results in a harder texture but the addition of sheep’s milk helps soften it.

Halloumi has been trademarked as a Cypriot product since the 90’s, despite a short period of recent revocation which has since been restored. Under the collective community mark, halloumi is produced only in Cyprus with certain ingredients and production methods, while the producers are Cypriots and are registered in Cyprus. Halloumi is very important to the Cypriot economy, and accounts for over 15% of the country’s total domestic exports.

Traditional halloumi making

Traditionally halloumi contains goat’s and sheep’s milk only. However over the years the need for halloumi became very high, due to its globalization, and dairy farmers could not meet the demand. Goats and sheep are not able to produce a lot of milk during the hot seasons, which as we know in Cyprus there are prolonged high temperatures. Therefore cow’s milk began to be added in the blend as there was more of it available.

I came across a great short video showcasing the traditional way of making halloumi, using the woven baskets (ταλάρια) to expel the whey and adding only goat’s and ewe’s milk in the mixture. Traditional Afrodite’s halloumi made in Cyprus is available in Australia in some Woolworths and Coles stores. Also if you are in NSW in Australia, Galaxy traditional halloumi, imported from Cyprus is available in a few delis and specialised food stores from what I’ve seen.

My experience with halloumi making

The first time I saw halloumi and ricotta being made was at my husband’s aunty’s house, theia Maria, in Cyprus a few years ago. Then at Easter time in 2019 I had the opportunity to spend more time with her, as she was making cheese for the traditional Cypriot pastries, flaounes. Theia Maria makes traditional cheeses using milk from their farm and sells it to the locals. So I felt very privileged to be able to document her as she was working as well as listening to her explaining the cheese making process. And even more so to taste fresh warm cheese in the end.

A few months after our return from Cyprus, under the most fortunate circumstances, I was approached to help at the 2^nd Annual Halloumi Festival hosted by the Cyprus Community of Melbourne. I was asked to be the presenter during the four separate halloumi making workshops at the festival and I quickly jumped to the opportunity. My role was to speak and explain the steps involved, while a group of experienced halloumi makers were working to turn somewhat 50L of milk each time into halloumi from scratch. So I took it upon myself to be as much of an expert in that role as I could, because the audience’s understanding dependent on it and of course they would ask questions, which I needed to be able to answer.

Then the real fun begun! I was determined to educate myself more and make my own halloumi and ricotta from scratch. I had learnt a lot from my husband’s aunty to begin with, I then researched, read and watched countless of videos before I felt ready to attempt the process myself. And I have to say the first time was quite successful but improvements needed to be made and it only left me with more questions I wanted answered. Hence after multiple attempts, I am more confident in writing this blog post with as much detail as I possibly can, so you don’t need to spend countless hours doing it! Here is an article from Neos Kosmos about the halloumi festival and the workshop, including a snippet video of my presentation and some of my photos.

Please do not be intimidated by my long post, the actual process is easier than you think. The teacher in me just wants you to be well informed, beginning with the explanation of some of the terms and then of course the method! Read through the information beforehand, study the process photos, watch my YouTube video or on IGTV and then follow the recipe to make your own halloumi from scratch.  

Pasteurised vs Non pasteurised milk

Pasteurisation simply means that the milk has been heat processed to eliminate any possible microbial growth. It is the safest way to enjoy milk for all its health benefits. Non pasteurised milk, also referred to as raw milk, is not heat treated in any way and hence commercially it is not seen in supermarkets readily available. However, traditionally non pasteurized milk is used for halloumi making. The milk is heat treated through the process of rising temperatures when the halloumi is cooking. I was only able to get in contact with one supplier of raw goat’s milk, Jannei, as I wanted to recipe test that version also. However due to the drought earlier in the year followed by the bush fires in NSW, the supply of raw goat’s milk has been extremely low. If I get the chance in the future to use raw goat’s milk I’ll add an update on this blog post.

Homogenised vs Non-homogenised milk

In general most of the milk bottles found at the supermarket these days are of homogenised milk. Homogenisation basically means that the fat particles and proteins in the milk are broken up into smaller parts so that they are dispersed evenly by a high pressure procedure. It does not involve any chemicals and it does not make a difference to the quality of the milk. However homogenisation does make the milk look whiter and taste smoother as the yellow fat is evenly distributed.

Non-homogenised milk, or also called cream on top, means just that. The yellow fat is found on the top of the milk usually and you may disperse it through the milk simply by vigorously shaking the bottle. To make halloumi from scratch I’ll be using non homogenised milk as it means the proteins have not been broken up and are able to hold together during curd formation. If you wish to use homogenised milk instead, you will have to add calcium chloride in the milk first as well as the rennet to help with the coagulation.

Through my numerous recipe tests making halloumi from scratch, I’ve used three different types of brands of non-homogenised cow’s milk. The main difference (excluding the price) I found was the yield of halloumi in the end. The brand that resulted with the most halloumi cheese was the Demeter Biodynamic non-homogenised milk, followed by Paul’s Farmhouse Gold Cream on top and then Barambah Organics full cream milk.

Rennet

Rennet (πυτιά) is the ingredient added to help coagulate the milk into cheese curds (τυρόπηγμα). Essentially it contains active enzymes to help convert the milk proteins and fats into a solid mass. It comes in different forms including a powder, tablets and a liquid. The rennet may also be animal derived (e.g. from the stomach of calves) or plant derived. For this recipe I used the liquid vegetarian derived Mad Millie brand. With each type and brand, the amounts required vary, so read the package carefully. From my discussion with one of the cheesemakers about making halloumi from scratch, it was suggested I add double the amount of rennet as there are no other added cultures.

Equipment and ingredients required

Halloumi is easy to do at home as you don’t require complicated equipment and the ingredients are accessible. Here is a list with a short explanation next to each one:

1. Non homogenised / pasteurised cow’s milk – the type of milk required to make halloumi for this recipe.
2. Rennet – to help coagulate the milk and form cheese curds.
3. Measuring syringe – to measure the mL of rennet required.
4. Milk thermometer – to keep track of the milk temperature at the different stages.
5. Large 10L pot – to hold and heat all the milk added.
6. A second large 10L pot or container – to hold the whey once you separate from it from the cheese curds.
7. Cheese cloths or butter muslin – to wrap the cheese curd with and allow the curd to set.
8. Cheese mats or cooling racks – to place the pressed curds and then the halloumi pieces to allow the whey to be expelled.
9. Deep trays – to catch the whey expelled.
10. Wooden boards and heavy items – to push down on the curds and help expel the whey.
11. Non iodised (cooking or fine sea salt) – to brine the halloumi.
12. Fresh and dry mint – to give the halloumi flavour and help preserve it.
13. Citric acid – to help produce ricotta from the whey.
14. Ricotta basket and draining compartment – to collect the ricotta in and allow it to set.

I was able to get all the cheese specific items I needed from Bee Sustainable in Brunswick (Melbourne, VIC) or you may visit the Mad Millie website directly to order online. From Bee Sustainable it is only a 10min drive to Terra Madre (Northcote, VIC) where I find the Demeter Bionynamic Non Homogenised milk. As I mentioned already it has been the brand with which I managed to produce more halloumi out of the 8L I used.

Otherwise opposite the Bee Sustainable shop there is the Organic Wholefoods shop from where you may purchase other non-homogenized milk. In addition, Coles and Woolworths stock the Paul’s Farmhouse Gold – cream on top brand.

Steps involved

Step 1 – Cheese curd formation

The first step involves bringing the milk to a lukewarm temperature 32-35°C and then adding the diluted rennet. After less than an hour watch the magic happen… I know my kids were mesmerized! The milk will be converted to cheese curds, which will become the halloumi eventually. The cheese curds will be separated from the whey (pronounced like ‘way’ – νορό) which is the liquid they will be suspended in.

Step 2 – Cutting the curds

After the curds are formed they need to be cut. You can do that with a knife, a wooden spoon or traditionally in the village this is done by hand! Begin by cutting the curds in strips horizontally then vertically, followed by an angle from the top all the way to the bottom. The aim is to cut the curds in smaller pieces to help with the whey extraction. After cutting, the pot is heated slightly, to about 40°C, and then allowed to rest for 15min. Hence the cheese curds will start bonding.

Step 3 – Separating and shaping the curds

To separate the cheese curds from the whey you need to line a strainer with a cheese cloth and place it on top of another large pot or a bowl. The cheesecloth has very tiny holes which are perfect to help separate the solid curds from the liquid whey. But you need to ensure that you keep the whey as you will need it to cook the cheese curds in it next.

Once you separate the curds you need to then shape them. At this point you can do either of these two things: 1. create a big rectangular slab of curd wrapped in a cheesecloth or 2. place the curds in special cheese containers or small ricotta strainers. Either way you need to squeeze out any whey left over by pressing the curds down and bind them together as firm as possible. However, forming one big rectangular curd requires a lot less effort and equipment on your behalf so I’m keeping that in the method for simplicity.

After pressing you will need to cut and cook the cheese curds you have been pressing. The recipe below has a recommended size based on the fact that the curds will expand while cooking and they will be folded over. In the end I make 3 large halloumi pieces but you may choose to cut them differently, based on your preference.

Step 4 – Cooking the cheese

The halloumi is cooked in the whey you reserved from the previous step. The whey is heated to 93-95°C and the halloumi is cooked for about 50min. During the cooking you will see them floating on the surface. It’s at this point that the halloumi is pasteurized if you are using raw milk. Important to note here that you need to monitor the temperature during the cooking time so it doesn’t rise too much. Finally the halloumi cheese is removed and allowed to cool slightly on a cheese mat or cooling rack.

Step 5 – Brining and storage

While the halloumi is still hot, but not too hot to burn your hands, press it on both sides with salt and mint, then fold to create the typical halloumi shape. Salt used here should be pure/non iodised (e.g. fine sea salt). Mint and salt are added for flavour but also both act as a preservative. These are the only additives used, which makes this cheese chemical free. Halloumi salted this way can be kept wrapped for about 3 days fresh in the fridge, otherwise you must freeze them. To enjoy the halloumi from frozen, simply thaw it in the fridge overnight.

On the other hand, instead of sprinkling a generous amount of salt on top you may prepare a brine solution to store it in. After the halloumi is cooked and cooled enough for you to touch, place some fresh mint leaves in the middle and fold it over. Add enough salt just to cover it lightly and then set aside to cool. After you have extracted the ricotta from the whey (step 6), get 1.5L of whey and add 120g of non-iodized salt to dissolve. Pour it in a clean sealable container (preferably glass) and allow it to cool. Once the brined whey (αλατισμένος νορός) is cooled, place the halloumi in and allow it to brine overnight before you can enjoy it. The 8% brined solution should be able to sustain the halloumi cheese for a few months in the fridge.

Step 6 – Extracting whey ricotta

Ricotta, which translates to recooked, is very well known as a byproduct dairy. Commonly made from whey after other cheeses have been cooked, although you may also use whole milk. This blog post is heavily focused on the process of making halloumi. However the ability to collect ricotta from the whey is quite rewarding despite the small amounts formed. Warm ricotta with some sugar/honey and cinnamon is definitely a winner. Or you may allow it to set in the ricotta basket for a few hours and cut it up.

Through traditional halloumi making, from most of the videos I watched, the ricotta is collected before the final cooking of the halloumi by just adding salt to the whey and letting the ricotta form. I tried that a few times and it did not quite work for me. Then at the halloumi festival I was presenting at I was speaking with George, one of the halloumi makers, who said they collect the ricotta in the very end by adding salt and citric acid. That way, as he explained, curds fallen off the halloumi during cooking also forms part of the ricotta. The citric acid is added when the temperature of the whey is between 85-87°C. At a temperature below that range I found that the ricotta takes a very long time to form. At a higher temperature I noticed that the ricotta is not as soft in texture, it’s grainier.

Ways to enjoy eating halloumi

Halloumi is popular for its ability to grill without melting and its versatility in how it may be incorporated in dishes. It may be eaten fresh with watermelon or grated on pasta, fried, baked in savoury cakes or pastitsio, added as part of a filling like in ravioli or tiropites (cheese pies). You may even add small halloumi pieces in boiling soup and they do not melt, instead they just soften! The suggestions are endless…

Would love to hear your feedback below or on any of my social media pages – Facebook or Instagram .

5 from 8 votes

Print

How to make halloumi and whey ricotta from scratch – A complete guide

Prep Time

20 mins

Cook Time

1 hr

Resting time

1 hr 45 mins

 

Course: Side Dish

Cuisine: Cypriot

Keyword: from scratch, halloumi, halloumi recipe

Author: Eleni Georges

Ingredients

• ¼ cup dechlorinated water
• 8 L non-homogenised pasteurised cow’s milk
• 8 mL vegetarian liquid rennet, Mad Millie Vegetarian rennet brand
• non iodised salt, cooking or fine sea salt
• dry mint
• fresh mint leaves
• 2 tsp citric acid

Instructions

Cheese curd formation

1. Boil some water and keep ¼ cup aside to cool down. The boiling will dechlorinate the water. Shake the milk bottles to help get all the cream out. Then pour the milk in the pot and bring the temperature to 32-35°C. Dilute the liquid rennet in the cooled water and take the pot off the heat. Each liquid rennet varies in strength so you must read the bottle instruction first. For halloumi use double the recommended amount because there are no added cultures. Pour the diluted rennet in the warmed milk and stir it well. Cover the pot with a towel and lid and set aside for 50min for the milk to set and form curds.

Cutting the curds

1. Use a knife to cut the curds by cutting through about 2cm strips horizontally and then vertically. Then cut through at an angle all the way to the bottom of the pot to form smaller pieces. Bring the temperature to about 40°C, then let the curds rest for 15min, with the lid on.

Separating and shaping the curds

1. Line a large strainer with a cheese cloth and place it on top of another large pot or bowl. You need to ensure you keep the whey (liquid) that is left behind as that will be used again. Wrap the curds with the cheese cloth and push out any excess whey that may be released in the pot they are resting on.
2. To form the rectangular shaped halloumi, place the wrapped curds on small mesh cooling racks or cheese mats under a deep tray. Press the curds to make a rectangle of about 24x16cm. Don’t worry if it’s not the exact measurements but ensure the curds are well bound together as you are wrapping it. Add a wooden board on top of the wrapped curds and a weight on top of that e.g. a juice bottle, for about 40min. This is the most crucial part for your curds to hold well together while cooking. Hence make sure as much whey as possible is released and that the curds are bound well together. After the 40min, carefully unwrap the block of cheese curd and cut the rectangle to form three equal 8x16cm blocks. You may cut them smaller but remember after cooking you are folding them over so they will be halved in length.

Cooking the cheese

1. While the curd is getting pressed, heat the whey to 93-95°C, do not let it boil. It will take about 10min to reach that temperature. Once the curds are ready and the whey has come to the right temperature, place the curds in the whey for about 45-50min. Gently stir the bottom of the pot without agitating the cooked curds too much, just enough so they are not stuck to the bottom. Throughout the cooking process if a lot of foam is formed extract it. Once the time has passed and the halloumi has been raised to the surface, use a slotted spoon to remove the halloumi. Carefully place the halloumi pieces on a cooling rack, on top of a deep dish to collect the liquids expelled. Around 900g-1.1kg of halloumi will be made depending on the brand of milk used.

Brining and storage

1. As soon as you can touch the halloumi sprinkle some dry mint and ¾ -1 tbs (about 15-20g) of fine non iodised salt on both sides. Each block of halloumi will weigh about 300g so the amount of salt should be sufficient but this also may vary based on your taste. Place some fresh mint leaves in the middle and fold the halloumi over. Repeat with the other two blocks.

2. Let the halloumi to cool down, allow the salt to be absorbed for a couple of hours and then you can enjoy it fresh or cooked. To store the halloumi, seal it well and place it in the fridge to consume within 3 days. Otherwise wrap it well it and place it in the freezer for up to 3 months. Read the blog post above for further storage/brining options.

Extracting whey ricotta

1. To make the ricotta, wait for the whey to cool to a temperature of about 85°C, add 2 tsp of non-iodised salt, then add 2tsp of citric acid slowly and keep stirring until the ricotta curds form. As a measure, for every 2L of milk used to begin with, add ½ tsp of citric acid. Keep the temperature between 85-87°C. The ricotta shouldn’t take long to form. Allow the ricotta curds to rest and bind together in the pot for about 7-10min. Then scoop them out, using a strainer, in the ricotta basket. Keep some of the whey in the draining basket as well to help preserve the ricotta. Enjoy the ricotta warm with some sugar/honey and cinnamon or you store it in the fridge to enjoy cold for up to 24hrs.

Cooking tips

1. To fry the halloumi cut it in slices 0.5-1cm thick. Use a paper towel to absorb any excess liquid. Use a non-stick frying pan and dry fry it on a medium to high heat. There is no need for added oil as the halloumi will release some itself and it will soften too much if you add some as well.

2. Cook each side for up to 2min or until a brown colour is achieved. Try not be tempted to flip the halloumi continuously, you only need to flip it over once. However take care the halloumi doesn't burn.